Mini Hakkero Lasercut Version Front:Received LEDs and came up with hopefully the correct resistors/power arrangement
wireleds
Ahh, cardboard. The poor man's PCB.
Started poking the LEDs through based on my design while setting up the leads so that they match the circuit.
Started soldering and snipping the leads... hopefully I didn't reverse any of the LEDs :/
All the LED wiring is done!! Looks somewhat like a mini-arc reactor....
Whew, what a mess. I really hope I didn't screw up with the design or with the resistor calculations... de-soldering that is impossible.
Tengu Geta FrontFound a co-worker that is able to lend me a nice tablesaw. It fraking weighs like 400 pounds lolz.
Gonna try making it out of Pine first... since 3 inch thick pieces of wood is hard to find and pricy to obtain... Will try combining 3 pine studs together first.
Glue is now dry, so took it to the tablesaw for some squaring, trimming to size, and the a rough-cut set of beveled edges.
Aya Skirt Front:Finished the waistband clasp. The skirt is now FINISHED!